Feature Network

Ethernet Hubs
An Ethernet hub is also called a multiport repeater. A repeater is a device that amplifies a signal as it passes through it, to counteract the effects of attenuation. If, for example, you have a thin Ethernet network with a cable segment longer than the prescribed maximum of 185 meters, you can install a repeater at some point in the segment to strengthen the signals and increase the maximum segment length. This type of repeater only has two BNC connectors, and is rarely seen these days. The hubs used on UTP Ethernet networks are repeaters as well, but they can have many RJ45 ports instead of just two BNC connectors.
When data enters the hub through any of its ports, the hub amplifies the signal and transmits it out through all of the other ports. This enables a star network to have a shared medium, even though each computer has its own separate cable. The hub relays every packet transmitted by any computer on the network to all of the other computers, and also amplifies the signals. The maximum segment length for a UTP cable on an Ethernet network is 100 meters. A segment is defined as the distance between two communicating computers. However, because the hub also functions as a repeater, each of the cables connecting a computer to a hub port can be up to 100 meters long, allowing a segment length of up to 200 meters when one hub is inserted in the network.