Trainers. Powered by Blogger.
RSS
Showing posts with label Cable Category. Show all posts
Showing posts with label Cable Category. Show all posts

Cable Category


Category 3 cable, commonly known as Cat-3, is an unshielded twisted pair (UTP) cable designed to reliably carry data up to 10 Mbit/s, with a possible bandwidth of 16 MHz. It is part of a family of copper cabling standards defined jointly by the Electronic Industries Alliance and the Telecommunications Industry Association. Category 3 was a popular cabling format among computer network administrators in the early 1990s, but has since been almost entirely replaced by the very similar Cat-5 standard, which offers higher top speeds.

Category 5 cable, commonly known as Cat 5, is an unshielded twisted pair type cable designed for high signal integrity. The actual standard defines specific electrical properties of the wire, but it is most commonly known as being rated for its Ethernet capability of 100 Mbit/s. Its specific standard designation is EIA/TIA-568. Cat 5 cable typically has three twists per inch of each twisted pair of 24 gauge copper wires within the cable. The twisting of the cable reduces electrical interference and crosstalk. Another important characteristic is that the wires are insulated with a plastic (FEP) that has low dispersion, that is, the dielectric constant of the plastic does not depend greatly on frequency. Special attention also has to be paid to minimizing impedance mismatches at connection points.
Cat 5 cables are often used in structured cabling for computer networks such as Fast Ethernet, although they are also used to carry many other signals such as basic voice services, token ring, and ATM (at up to 155 Mbit/s, over short distances).

RJ-45 electrical connectors are nearly always used for connecting category 5 cable. Generally solid core cable is used for connecting between the wall socket and the socket in the patch panel whilst stranded cable is used for the patch leads between hub/switch and patch panel socket and between wall port and computer. However it is possible to put plugs onto solid core cable and some installations save on the cost of patch panels and/or wall ports by putting plugs directly onto the fixed category 5 wiring and plugging them straight into the computers and/or hub/switches.

  • Digg
  • Del.icio.us
  • StumbleUpon
  • Reddit
  • RSS